Description
 |
Cast iron ‘C’ face motors deliver Feel Free To Contact Us: |
| Specifications: |
| Horsepower | 1-1/2 | ||
| RPM | 3600 | ||
| Approximate Weight (lbs) | 49 | ||
| Degree of Protection | IP55 | ||
| Enclosure Type | TEFC | ||
| Full Load Amps | 4.4-4/2 | ||
| FL Efficiency (%) | 86.3 | ||
| Service Factor (SF) | 1.25 | ||
| Frame Size | 143TC | ||
| Frequency | 60/50 HZ* | ||
| Insulation Class | Class F | ||
| Mounting Type | Rigid Base | ||
| Phase | 3 | ||
| Voltage | 230/460 | ||
| NEMA Design | B | ||
| Shaft Dia. | .875″ (7/8″) | ||
| “C” Dim. | 13.6″ | ||
| Weight lb. | 48 | ||
| This motor is reversible. |
| For Motor Specifications: Click Here | ||
| Select Proper Motor Protection: Click Here | ||
Applications |
||
Industrial and commercial pumping units
|
| * | aaaaaaaaaaaaaa HP |
aaaaaaaaaaaaa 3 |
aaaaaaaaaaaaa Click The Link Below For |
||
| * | R.P.M. | 3600 | Proper Motor Protection | ||
| * | Volts | 208-230/460 | |||
| * | Amps | 3.8 | |||
| * | Phase | 3 | |||
| * | NEMA Design | B | |||
| * | Hertz | 60 | |||
| * | S.F. | 1.25 | |||
| * | Enclosure | T.E.F.C. | |||
| * | Shaft Dia. | .875 | |||
| * | C Dim. | 1.276″ | |||
| * | Weight lb. | 57 |
This motor is reversible.
The motor connection detail is on the nameplate of the motor
Please Click Here for Motor Specifications.
Performance and Convenience
Service factor: 1.15 @ 60 Hz; 1.0 @ 50 Hz
NEMA Design B Performance/ High starting torque
F1/F2 reversible
Dual-drilled feet for mounting flexibility
Lifting provisions
Protection
Class F insulation system; Class B rise at full load; Class H vacuum pressure impregnation (VPI) resin for all windings
Stainless steel nameplate and zinc plated hardware, corrosion resistant epoxy paint
IP55 protection
Condensation drains with plugs
Reliability
Regreasable open bearings
3-year warranty (extended warranty available)
Rating
NEMA MG- 1, Table 12-12
Class l, Div. ll, Groups A, B, C, D, T2B; Class ll, Div. ll, Groups F, G
40° C ambient continuous duty
Dual voltage ratings suitable for part wind start on lower voltage
Windings rated for 2200V peak voltage spikes
Applications
Industrial and commercial pumping units
Suitable for use with variable frequency drives
